|
|
|
News clipping from the Pikes Peak Bulletin about one of the bronze pours. We did two bronze pours and the Business of Arts Center in Manitou Springs
|
|
|
|
Setting up shot, this is what we started with, parking spaces. It is amazing how little space we needed to set up a portable bronze foundry.
|
|
|
|
This is all of us starting to set up the portable foundry at the Business of Arts Center. We used a part of their parking lot.
|
|
|
|
Setting up....looks like we made some progress.
|
|
|
|
|
We eventually had caution tape up to barricade people off from our work area, it was dangerous stuff
|
|
|
|
This is our instructor lighting the furnace. Way to go Mark!
|
|
|
|
The gang is loading bronze into the crucible to start getting it melted
|
|
|
|
Bronze ingot before it goes into the crucible
|
|
|
|
|
Here a couple of us are gearing up in safety gear
|
|
|
|
This is me, no comments please, the safety gear is not one size fits all
|
|
|
|
This is where the top of the molten bronze must be cleaned before we pour the bronze
|
|
|
|
This was utterly amazing, I was stunned by the fiery beauty.
|
|
|
|
|
Here is a closer image of the crucible glowing in the evening, fresh from the furnace
|
|
|
|
Here we are pouring the bronze into the molds.
|
|
|
|
Here is another view of the molten bronze being poured.
|
|
|
|
This is an incredible shot of the molten bronze. Thanks Rich! Richard is my son, I think he has a future in photography.
|
|
|
|
|
Another view of the molten bronze being poured
|
|
|
|
These are bronze spills after sand has been thrown over it. We still have to be very careful not to step on the spills.
|
|
|
|
This is the bronze as it cools, we placed pennies on the still hot bronze for luck. They were supposed to flare up into green flames, they did not.
|
|
|
|
This is one of my bronze sculptures frosh from the mold and still too hot to handle.
|
|
|
|
|
This is most of us afterwards, Jack is missing from the pic because he was taking the picture.
|
|
|
copyright © Nancy K. Wells-Georgia 2004
updated Oct 27, 2006